Arturia KeyLab 88 mk3 handleiding
Handleiding
Je bekijkt pagina 67 van 80
• Name: Give this Encoder a suitable name.
• Type: Off, Control, or RPN/NRPN.
• CC Number/Option: Depending on if the previous entry is set to CC Number or
RPN/NRPN, you can set MIDI Control Change number or select RPN or NRPN
here.
♪ RPN and NRPN are explained here [p.56].
• MIDI Channel: Set MIDI channel.
• Mode: These are the modes for the Encoders.
◦ Global: Uses the Global setting. This can be overridden by selecting on
of the modes below.
◦ Absolute: The Encoder sends a value between 0 and 127. When
KeyLab mk3 boots, the encoder value is initialized to 0. Turning the
Encoder clockwise increases the value if it's less than 127. Turning the
Encoder counter-clockwise will decrease the value if it is higher than
0.
◦ Relative Main: The Encoder sends a value corresponding to a position
change compared to last known position: +1, +2, –1, or –2 for instance.
Technically, the 0 is coded by the value 64, so a change of +1 will
result in a value of 65. Following this logic, a change of –2 will give a
message with the value 62.
◦ Relative Alt 1: This is identical to
Relative Main
but coded in 7-bits
Two's complement. 0 and the positive values are natural and negative
values are 127 for –1, 126 for –2, 125 for –3 et cetera.
◦ Relative Alt 2: Same coding as
Relative Main
but centered around 16
instead of 64. The 0 is coded by the value 16. A change of +1 will send
a value of 17, and a change of –2 will give a message with the value
14.
• Min/Max Value: When Type is Control, you can set the MIDI CC range here.
or
• MSB/LSB: When Type is RPN/NRPN, you can set LSB and MSB values here.
♪ LSB and MSB are explained here [p.57].
Arturia - User Manual KeyLab 88 mk3 - User Program 60
Bekijk gratis de handleiding van Arturia KeyLab 88 mk3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | KeyLab 88 mk3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9684 MB |
