Arturia KeyLab 88 mk3 handleiding
Handleiding
Je bekijkt pagina 61 van 80
5.4.1.11. Arp Tolerance
When KeyLab mk3 is set to External Clock and not receiving any clock signal, or when set
to an internal clock, a Tolerance will be added between 2 sets of notes.
5.4.1.12. Factory Reset
If you want to go back to the default settings of KeyLab mk3, press here. You'll be taken to
a page where you can accept or decline.
5.4.1.13. Firmware
Here's a readout of the current firmware version number in your Keylab mk3. Updates are
expected to happen, and updating can be done from Analog Lab or the MIDI Control Center
app.
5.4.1.14. Serial Number and Unlock Code
Be sure to register your KeyLab mk3 as soon as possible! Your serial number and unlock
code are written here, and also on a sticker on the bottom panel and on the KeyLab mk3
packaging.
These numbers are required during the online registration process. You may want to record
these elsewhere or take a photo of the sticker in case it becomes damaged or your
instrument gets stolen.
5.4.2. Keyboard Settings
This section focuses on parameters concerning the keyboard and MIDI Parts settings.
Arturia - User Manual KeyLab 88 mk3 - User Program 54
Bekijk gratis de handleiding van Arturia KeyLab 88 mk3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | KeyLab 88 mk3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9684 MB |
