Arturia KeyLab 88 mk3 handleiding
Handleiding
Je bekijkt pagina 10 van 80
1. GETTING STARTED
1.1. Connecting KeyLab mk3
We recommend that you install Analog Lab and the other included software before reading
this manual. Be sure to register and authorize your software on the Arturia website.
1.1.1. Connecting via USB
Connect KeyLab mk3 to your computer using the included USB cable. Power and MIDI is
supplied through this connection.
KeyLab mk3 is a class-compliant USB device, so its drivers are automatically installed when
connecting to a Mac. Your controller keyboard will be ready to use within a few seconds
after power-up.
For Windows users: The Arturia USB MIDI Driver, installed along Analog Lab, is necessary to use the
KeyLab mk3 with the Analog Lab and DAW integration.
1.1.2. Connecting via MIDI
If you'd like to use KeyLab mk3 to control external devices without a computer attached,
simply use an optional 12V DC 1.0A power supply.
Connect a MIDI cable between KeyLab mk3’s MIDI Out connector and the MIDI In
connector of one of the external devices. From there you can daisy-chain the MIDI signal
through further devices. Better yet, use a MIDI patchbay; this will help avoid an
accumulation of lag time as the data passes through each device.
KeyLab mk3 can output MIDI via USB and MIDI ports simultaneously.
1.2. Front Panel Layout
KeyLab 88 mk3 comes in 2 different versions.
White version
3 Arturia - User Manual KeyLab 88 mk3 - Getting Started
Bekijk gratis de handleiding van Arturia KeyLab 88 mk3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | KeyLab 88 mk3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9684 MB |
