ARRI SkyPanel S60-RP handleiding
Handleiding
Je bekijkt pagina 35 van 76
Fixture Menu
35
Stand-Alone Lighting Effects (only SkyPanel-C)
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „Lighting Effects“ is displayed. Press I/S twice
to open the menu.
• „Party Effects“ activates a stand-alone demo sequence, „Off“
de-activates the demo sequence.
The demo sequence calls up the color spectrum or changes
the color temperature from warm to cold and vice versa in an
endless loop. Set the intensity with I/S. Set the speed with the
central rotary knob from 0-100% (60 s - 1 s). The right rotary
knob sets the saturation and changes between color and color
temperature sequence. With the right rotary knob at „0“ the col-
or temperature loop is active. Turn the right rotary knob clock-
wise to increase the saturation to 100%.
To set the Display Behavior
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „Display Setup“ is displayed. Press I/S to open
the menu.
• Turn I/S, until „Display Illumination“ is displayed. Press I/S to
open the menu. Select the desired setting by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Display Brightness“ is displayed. Press I/S to
open the menu. Select the desired brightness by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Display Contrast“ is displayed. Press I/S to
open the menu. Select the desired contrast by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Display Rotation“ is displayed. Press I/S to
open the menu. Select the desired setting by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Error Mode Display“ is displayed. Press I/S to
open the menu. Select the desired setting by turning I/S.
Press I/S to confirm the setting.
Please refer to section „ “Fixture Menu” on page 42 for a de-
tailed explanation of the options.
To set the „Battery Low Voltage Warning“ Voltage
You can select a voltage that will cause a warning to display on
the screen if the battery connected to the fixture goes below the
set voltage. The display and the „Power“ LED indicator light will
turn red and the message „Low Battery“ is displayed in the top
left corner of the display.
To set a warning voltage:
• Turn I/S, until „Fixture Settings“ is displayed. Press I/S to open
the menu.
• Turn I/S, until „Low Battery Warning“ is displayed. Press I/S
to open the menu. Select the desired warning voltage in
0.1 V increments by turning I/S. Press I/S to confirm the set-
ting.
• Press „Menu“ to close the menu.
Bekijk gratis de handleiding van ARRI SkyPanel S60-RP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S60-RP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 8288 MB |
