ARRI SkyPanel S360-C handleiding
Handleiding
Je bekijkt pagina 25 van 44
25
FunctionsFunctions
25
To save the log files
1.Connect an USB memory stick to the USB-A connector of the SkyPanel.
2.Press the MENU button (10) to open the fixture menu.
3.Turn the encoder, until USB Functions is selected. Press the encoder to open the menu.
4.Turn the encoder, until Save Error Log is selected. Press the encoder to open the menu.
5.Select Yes and press the encoder to confirm saving the log files. Select No to abort saving the log files.
6.The log files will be saved on the USB memory stick.
To Read out Fixture Settings
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Enabled Functions is displayed. Press the encoder to open the menu.
Change the status of an option by selecting the option. Press the encoder, to change the status of the
option.
To Read out Fixture Information
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Fixture Settings is displayed. Press the encoder to open the menu.
3.Turn and press the encoder to display fixture information.
Please find a detailed overview of the fixture menu in chapter Overview of the Fixture Menu on page 35.
To Perform a Factory Reset
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Factory Reset is displayed. Press the encoder to open the menu.
3.Turn the encoder to choose the option Yes and perform a factory reset. Press BACK (11) to abort.
4.The SkyPanel reboots with its factory settings.
Light Engine Compensation (C-Versions only)
ARRI always tries to offer lampheads of highest quality and performance. LEDs represent a new type of
light source that is developing rapidly. This is why different SkyPanels can be equipped with different
generations of light engines in one installation. In most cases, newer devices achieve higher final
brightness levels due to the further development of LEDs. Light engine compensation is used to adjust the
different brightness levels of the devices.
The final brightness of devices with brighter light engines is limited to ensure the same final brightness for
all devices in the installation.
The Light Engine compensation influences the following control modes:
• CCT
• HSI
• RGBW calibrated
• Gel Mode
• Source Matching
• x,y Coordinates
• Lighting effects
To Read out Light Engine Information
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Fixture Settings is displayed. Press the encoder to open the menu.
3.Turn the encoder, until LE Compensation is displayed. Press the encoder to open the menu.
4.Select Light Engine Status and press the encoder.
• LE Gen1 Installed: The fixture is equipped with Generation 1 Light Engines.
• LE Gen2 or above installed: The fixture is equipped with Generation 2 Light Engines.
• LE Gen Mixed! - Call Service: The fixture is equipped with drivers or Light Engines of different
generations. The fixture doesn‘t work correctly. This message is mostly due to improper repair attempts.
Please contact your ARRI service partner.
Bekijk gratis de handleiding van ARRI SkyPanel S360-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S360-C |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4458 MB |
