ARRI SkyPanel S360-C handleiding
Handleiding
Je bekijkt pagina 16 van 44
Functions
16
Low End Mode
The Low End Mode optimizes the dimmer quality at low intensity levels and enables SkyPanel to generate
accurate CCTs with high color rendition and smooth dimming at very low light levels. The Low End Mode
can cause flickering when used with cameras shooting at high frame rates.
Tungsten Mode
The tungsten Mode can mimic the dimming curve and strike on-and-off effect of a traditional tungsten lamp.
The CCT warms as the light is dimmed and when the intensity drops to zero quickly there is a short
afterglow of warm light. This mode is perfect for mixing the SkyPanel with tungsten sources or for producing
a familiar effect.
High Speed Mode
The High Speed mode generates flicker-free light for High Speed shootings. High Speed Mode has been
tested up to 25.000 fps and down to 2° shutter angle with no flicker or roll bars. The intensity is fixed in High
Speed mode. The only settings are 0% (black out) or 100% (full intensity). In High Speed mode the settings
for low end mode, tungsten mode, effects and PWM frequencies are ignored.The operation modes CCT,
HSI and GEL are available in High Speed Mode. When modifying a parameter the SkyPanel performs a
short black-out when applying the new value. The operation modes SOURCE and RGBW are not available
in High Speed Mode.
To set a special control mode
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Light Control is selected. Press the encoder to open the menu.
3.Turn the encoder, until Special Modes is selected. Press the encoder to open the menu.
4.Select the special mode by turning the encoder. Press the encoder to confirm the setting.
5. Press MENU to close the menu.
Overview of the Special Control Modes
Control Mode Application Dimming behavior Flicker behavior
Stage Mode Live Audience
Very good very low end
range
Will most likely cause
flicker
Low End Mode TV-Studio, Film Good in low end range Might cause flicker
Tungsten Mode
Simulation of a tungsten
source
Good through whole
range
Might cause flicker
Normal Mode (no special
control modes active)
Normal dimming
Good through whole
range
Unlikely to cause flicker
Highspeed Mode No dimming --- Flicker free
The Stage Mode can not be used with active Low End mode and vice versa. The warning Not Avail-
able: Low End Mode or Not Available: Stage Mode will be displayed when you try to activate the
Stage Mode or Low End mode if the other mode is active. You need to de-activate the other mode
before.
NOTICE
Effects are de-activated in High Speed mode. When you try to call up an effect in High Speed mode,
the warning Not Possible: High Speed Active is displayed. When you try to activate the High Speed
mode with an effect active, the warning Not Possible: Effect Active is displayed. De-activate the ef-
fect or the High Speed mode to change the control mode.
NOTICE
Bekijk gratis de handleiding van ARRI SkyPanel S360-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S360-C |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4458 MB |
