ARRI SkyPanel S360-C handleiding
Handleiding
Je bekijkt pagina 15 van 44
15
FunctionsFunctions
15
To Set the Brightness in all Operating Modes
Set the brightness in both operating modes continuously with the encoder (4). The setting is dynamic:
Turning the encoder fast changes the intensity in coarse steps, turning it slow changes the intensity in fine
steps.
To Set the Dimming Curve
The SkyPanel supports four dimming curves. The dimming curves are global: They affect both the intensity
control via the fixture menu or DMX, wireless DMX, Art-Net and sACN.
• Linear: The intensity changes proportional to the encoder (4) or the channel value.
• Exponential: The resolution is high at lower intensity levels and low at higher intensity levels. Use this
dimming curve when you need a high resolution at low intensity levels. This is the default setting.
• Logarithmic: The resolution is low at lower intensity levels and high at higher intensity levels. Use this
dimming curve when you need a high resolution at high intensity levels.
• S curve: The resolution is both high at lower and higher intensity levels and low at intensity levels in be-
tween. Use this dimming curve, when you need a high resolution at low and high intensity levels.
To set the dimming curve
1.Press the MENU button (10) to open the fixture menu.
2.Turn the encoder, until Light Control is selected. Press the encoder to open the menu.
3.Turn the encoder, until Dimming Curve is selected. Press the encoder to open the menu.
4.Select the dimming curve by turning the encoder. Press the encoder to confirm the setting.
To Set a Special Control Mode
The SkyPanel supports four special control modes. The special control modes are global: They affect both
the intensity control via the fixture menu or DMX, wireless DMX, and Art-Net or sACN.
Stage Mode
Stage Mode is designed for live entertainment and theatrical performances which require completely
smooth dimming to zero without intensity drop offs. Some color changes may happen at very low dimming
levels.
Stage Mode is not designed for use with motion picture or broadcast cameras as flicker may occur.
Presets made in Firmware 4.0 or higher will not work on previous firmware versions.
NOTICE
The dynamic of an effect using the intensity is very low, when you choose a basic intensity value in
a flat area of the dimming curve. Choose a different effect or select another dimming curve to create
a more dynamic effect.
NOTICE
Bekijk gratis de handleiding van ARRI SkyPanel S360-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S360-C |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4458 MB |
