ARRI SkyPanel S360-C handleiding
Handleiding
Je bekijkt pagina 14 van 44
Functions
14
To Use the Extended Color Control via the Control Panel
Press the MODE button for approximately 3 sec in the home screen to activate the extended color control.
If RGBW direct mode is active, the extended color control is not available. Please activate the calibrated
RGBW color mode ( see Calibrated Color Space on page 17) to be able to activate the extended color con-
trol. If the extended color control is active, a short press of the MODE button switches between the
operation modes (see To Set the Operation Mode on page 9).
If an effect is active, press the MODE button for at least 3 sec to switch between the color mode, the
extended color control screen and the effect parameter screen.
The picture below shows the color control screen.
In the upper left and right corner of the display the active special and operation modes are displayed similar
to the home screen (in the picture above HSI operation mode).
Each parameter available is shown as a slider. Neutral parameters are indicated with the solid horizontal
line at the middle of the bar. The horizontal bar of each slider indicates the value of each parameter. The
selected parameter is indicated by a small bar under its slider. The name of the parameter and its value is
shown under the sliders in the display.
From left to right, the bars in the extended color control screen stand for the following parameters:.
Select the parameter using the right rotary knob (6). Set the value of the parameter with the encoder (4).
Please note:
• The resolution of the encoder adapts dynamically to the moving speed.
• Clockwise turn increments the value of the parameter.
• Counter-clockwise turn decrements the value of the parameter.
• Double press within 800 ms resets the selected parameter to neutral (0).
• Triple press within 1200 ms resets all parameters to neutral (0).
When changing the operation mode the current values of the parameters are stored and restored when
activating the operation mode the next time. After a power cycle, the SkyPanel extended color control
parameters are restored for each operation mode.
With activated extended color control:
• A star next to the active operation mode indicates the activated extended color control,
• the parameters are stored with each preset. Presets which contain parameters of the extended color
control are marked with a star,
• modifying an extended color control parameters leaves any active preset,
• the calibrated RGBW color space is activated by the SkyPanel when the extended color control is
activated via DMX,
• the direct RGBW color space is not available,
• the parameters are applied both to the start and end point of a cross fading,
• the parameters are not applied to lighting effects.
Description Parameter Range
Color temperature Warmer / Cooler
-1.000 > 0.000 > +1.000
Saturation Saturate / Desaturate
Red portion of current color + Red / - Red
Green portion of current color + Green / - Green
Blue portion of current color + Blue / - Blue
Cyan portion of current color + Cyan / - Cyan
Magenta portion of current color + Magenta / - Magenta
Yellow portion of current color + Yellow / - Yellow
Bekijk gratis de handleiding van ARRI SkyPanel S360-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | SkyPanel S360-C |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4458 MB |
