ARRI L5-C Plus handleiding
Handleiding
Je bekijkt pagina 13 van 40
Creative Functions | 4
L-SeriesPlus User Manual 13
4 Creative Functions
4.1 Set Lighting Parameters in CCT Mode
Set the color temperature continuously with the central turn knob (5). Set the green/magenta point
continuously with the right turn knob (6). The current setting is displayed above the turn knobs.
4.2 Set Color in HSI Mode
Set the hue continuously with the central turn knob (5). Set the saturation continuously with the right
turn knob (6). The current setting is displayed above the turn knobs.
4.3 Set Lighting Parameters in Gel Mode
Use the central turn knob (5) to set the color temperature 3.200 K or 5.600 K. The right turn knob (6)
offers two options: Best color displays the gel with optimized color quality, Brightest displays the gel
with optimized brightness.
1) Push the encoder (4) to open the gel library.
2) Choose the gel manufacturer (Rosco or LEE) with the central turn knob (5).
3) Use the right turn knob (6) to activate a gel category as shown in the table below.
4) Turn and push the encoder (4) to call up and set a gel from the gel set.
5) Push BACK (11) to close the gel set and set the intensity with the encoder (4).
6) Push the encoder (4) again, to re-open the gel set.
Rosco LEE
Color Correction Color Correction
CalColor Color Filters
Storaro Selection 600 Series
Cinelux Cosmetic
700 Series
4.4 Set the Light Source in Source Mode
Start the source mode and push the encoder (4) to call up a list of the light sources available. Use
the right turn knob (6) to set the category (please see DMX Protocol Specification for a detailed list).
Turn the encoder (4) to set a light source. The L-Series Plus calls up the light source set in real time.
Push the encoder (4) to use the light source.
4.5 Set the Color in RGBW Mode
The central turn knob (5) has no function in RGBW mode. Use the right turn knob (6) to set the
functionality of the encoder (4). Dependent on the right turn knob (6), the encoder (4) is used to set
the overall intensity of the red, green, blue and white color. Please note the setting Direct Control or
RGBW Color Space. You can store the RGBW color as a preset.
4.6 Set the Color in x, y Mode
The x,y mode defines the color using its x, y coordinates. Use the right turn knob (6) to set the
functionality of the encoder (4). Dependent on the right turn knob (6), the encoder (4) is used to set
the intensity, the x or y coordinate of the color. The range of both the x and y coordinate is 0.0000 to
0.8000.
Bekijk gratis de handleiding van ARRI L5-C Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | L5-C Plus |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3558 MB |
