ARRI L5-C Plus handleiding
Handleiding
Je bekijkt pagina 12 van 40
3 | Control Modes
12 L-SeriesPlus User Manual
3 Control Modes
The L-Series Plus offers, depending on the model, up to 31 control modes. Use the 8 bit modes with
basic controllers like simple fader consoles.
ARRI recommends the use of the 16 bit modes in combination with controllers supporting 16 bit
resolution to get best results. The high resolution provides smooth dimming and precise color
adjustments.
The coarse / fine modes utilize two channels for most parameters and provide higher resolution
compared to the 8 bit modes in combination with controllers that do not support true 16 bit
resolution. One channel sets the coarse value between 0 and 255 of the function. Each step is
divided in 256 increments using the fine channel. This way it is possible to control the light very
precise without using a true 16 bit resolution.
Below is a short overview of the different control modes. Please find a detailed overview of all DMX
modes in the document L Series Plus DMX Protocol Specification which is available for free
download on the ARRI website www.arri.com.
The CCT mode provides control of intensity, color temperature and green/magenta point.
Additionally the Extended Color Control is available to fine tune the beam parameters.
CCT and RGBW
This mode provides control of intensity, color temperature, green/magenta point and individual
channels for controlling the red, green, blue and white color.
CCT and HSI
Provides control of intensity, color temperature, green/magenta point, hue and saturation (HSI =
hue, saturation, intensity). In HSI mode the color and intensity is very even over the devices as it is
controlled using color algorithms which take the tolerances of the light engines into account during
calculation.
RGBW
Simple mode for controlling the overall intensity and the red, green, blue and white intensity when
only a limited number of channels is available.
HSI
Simple mode for controlling hue, saturation and intensity.
GEL
The GEL mode offers an extensive color filter list. The color temperature has two settings, 3.200 K
and 5.600 K. The intensity can be controlled as usual.
x, y Coordinates
The x, y mode determines the color displayed by its xy coordinates in the CIE 1931 diagram. Set the
x and y coordinate with 8 bit or 16 bit resolution. One channel determines the transition type when
fading from one color to another color.
Source Matching
Source Matching saves a lot of time when you need a specific illumination. Set the light source
which fits best to your demands from 50 different light sources.
Ultimate DMX Mode
The ultimate DMX mode allows the combination of different control modes. You can set two modes
and fade between them. This allows you to quickly set, prepare and crossfade the most suitable
control modes for your application.
Please find more information in the L Series Plus DMX Protocol Specification which is available for
free download on the ARRI web site www.arri.com.
Bekijk gratis de handleiding van ARRI L5-C Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARRI |
| Model | L5-C Plus |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3558 MB |
