Arecont Vision SurroundVideo Omni AV20175DN-28 handleiding

Bewakingscamera

Arecont Vision

26 pagina's

PDF beschikbaar

Handleiding

Arecont Vision SurroundVideo

Omni Installation Manual

Page | 12 support@arecontvision.com

SurroundVideo® Omni

Focusing the Cameras

1. Open a live view of the camera from your web browser or the AV Software provided (AV200).

2. Loosen the lens lock screw using a phillips head screwdriver (if necessary). Only do so if lens seems very

tight when turning. Lock screw should be tightened enough to provide some friction against the lens to

avoid focusing problems.

3. Manually rotate the lens to adjust the focus until the desired image is obtained.

4. For some lenses a focus shift will occur once the bubble is in place. Hold the bubble up to the lens when

focusing to account for the focus shift or see the “Focusing Alternate Lenses” section below for further

instruction.

5. Retighten the lock screw if necessary.

6. Install the Dome Cover by aligning the captive fasteners with the mating threaded holes on the camera

housing.

7. When mounting the Dome Cover to the Camera Housing ensure that the gasket is properly seating and

not folded. Failure to do so may result in water and dust ingress.

Tech

Tip

Bekijk gratis de handleiding van Arecont Vision SurroundVideo Omni AV20175DN-28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.