Arecont Vision SurroundVideo G5 Mini AV12585DN handleiding

Bewakingscamera

Arecont Vision

40 pagina's

PDF beschikbaar

Handleiding

Installation Manual

Page | 30 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

SurroundVideo

G5 Mini

Camera Power Up

This product should be installed by a qualified service technician in accordance with the

National Electrical Code (NEC 800 CEC Section 60) or applicable local code. Make sure

that your installation of wires complies with Electrical Code of the local government where

the camera is installed and no bare wires are exposed.

1. Connect the camera to a PoE port on 100Mbps network PoE switch using an Ethernet cable as

shown in the image below.

Reference #

Description

PoE Connector

2. If the camera is powered by an outside power supply, 18~48VDC (green and brown wires) or

24VAC(red and black wires), connect the power cable.

CAUTION! Make the connections inside a watertight compartment. Isolate unused power

wires individually.

After connections are made, ensure that the watertight compartment is tightly closed and

cables and conduits are properly sealed to prevent ingress of water.

3. Connect the PoE switch to your computer’s network port using an Ethernet cable.

Bekijk gratis de handleiding van Arecont Vision SurroundVideo G5 Mini AV12585DN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.