Arecont Vision SurroundVideo G5 AV20585PM handleiding

Bewakingscamera

Arecont Vision

35 pagina's

PDF beschikbaar

Handleiding

!! ! Installation!Manual!

Page | 18 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

SurroundVideo®!G5

Figure 5: Mount the Surface mount to the wall or ceiling

NOTE: If you use the side connection of the NPT port, remove the cap covering the side

entrance, otherwise; leave the cap in place. If using the NPT port, always use Teflon tape

around the threads to ensure proper sealing. The conduit fits ¾” NPT standard. Ensure NPT

port is facing downward.

4. Route the cable tree from the camera around the rear of the camera module and secure all

cables. See the Connections section for details on how to connect the camera.

5. Check that the indicator LED’s are illuminated to the desired conditions (see LED Indicator

table).

CAUTION! The captive fasteners must be used to properly secure the dome cover. Failure

to use the captive fastener may result in serious injury. When mounting the dome cover to

the camera housing, ensure that the gasket is properly seated and not folded. Failure to

do so may result in water and dust ingress. Water damage from improper installation is not

covered by the warranty!

Bekijk gratis de handleiding van Arecont Vision SurroundVideo G5 AV20585PM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.