Arecont Vision MicroDome G2 AV5756DNIR-S-NL handleiding
Handleiding
Je bekijkt pagina 12 van 56
Page 11 of 54
6. Adjust the pan and tilt to obtain the desired field of view. Then, lock the camera
head in place by tightening at least two of the three set-screws with the supplied
flat-head screwdriver.
i.
Do not over torque the screws.
Lock camera head after adjusting the field of view
NOTE: Ensure not to press the remote focus motor against the sides of the camera
module when adjusting the field of view.
Remote focus motor
7. Install the dome cover by aligning the captive fasteners on the camera housing.
If installing inside a 4S junction box, the MCD-4S accessory dome cover plate
(sold separately) is required.
NOTE: There's no IR function if using MCD-4S
Bekijk gratis de handleiding van Arecont Vision MicroDome G2 AV5756DNIR-S-NL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arecont Vision |
| Model | MicroDome G2 AV5756DNIR-S-NL |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8744 MB |
