Arecont Vision MicroDome G2 AV5555DNIR-S-NL handleiding

Bewakingscamera

Arecont Vision

28 pagina's

PDF beschikbaar

Handleiding

!! ! Installation!Manual!

Page | 6 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MicroDome®!G2

Surface Mount (-S Model) Installation

1. Determine a secure location to mount the camera.

2. Remove the dome cover from the camera by unscrewing the three captive fasteners.

Figure 1: Remove dome cover

3. If required, the lens may be further secured by tightening the three lens lock screws using the

supplied flat-head screwdriver. Do not over torque the screws.

Figure 2: Optional: further tighten three lens lock screws

4. The camera can be mounted two ways: surface mount or via a junction box to a wall or ceiling.

Choose the best method for your installation below:

a. Surface Mount: use the supplied template to mark three desired holes (there are six

holes to choose from; see Figure 3). Then drill the holes with a diameter of 8 mm (0.3 in)

and insert the supplied anchors into the holes. Attach the camera module and supplied

gasket securely using the supplied screws.

Bekijk gratis de handleiding van Arecont Vision MicroDome G2 AV5555DNIR-S-NL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.