Arecont Vision MegaView 2 AV2225PMTIR handleiding

Bewakingscamera

Arecont Vision

33 pagina's

PDF beschikbaar

Handleiding

Arecont Vision MegaView

2 Installation Manual

Page | 26 support@arecontvision.com

Pole Mount Adapter (AV-PMA) Installation Instructions

(Sold Separately)

Inside the box:

A. Pole Mount Adapter

B. 2x Small Steel Straps

C. 2x Large Steel Straps

D. Pack of four (4) machine screws (#8-32

5/8”)

Not included but needed:

 ¾” NPT Conduit

Image 18

1. Remove Pole Mount Adapter, steel

Straps and hardware from the box.

2. Attach provided Junction Box Adapter

(Image 1-B) to Pole Mount Adapter as

shown in Image 19.

3. Remove the conduit plug on Junction

box adapter and connect ¾” NPT

Conduit to Junction Box Adapter shown

in Image 19-1.

NOTE: Use silicon or water pipe seal tape

to make sure no water leakage between

conduit pipe and junction box adapter.

4. Run Ethernet Cable and other cables (if

necessary) through the Junction Box

Adapter and connect to MegaView

pigtail cable.

5. Attach MegaView

2 bracket to Pole

Mount Adapter as shown in Image 20.

6. Use the supplied two Steel Straps to

attach the Pole Mount Adapter to the

pole and tighten the compression

screws as shown in Image 20.

7. To adjust MegaView

2 bracket, please

reference “Mounting the Camera”, if

needed.

Image 19 Image 19-1

Image 20

Bekijk gratis de handleiding van Arecont Vision MegaView 2 AV2225PMTIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.