Arecont Vision MegaView 2 AV2225PMTIR handleiding

Bewakingscamera

Arecont Vision

33 pagina's

PDF beschikbaar

Handleiding

Arecont Vision MegaView

2 Installation Manual

Page | 15 support@arecontvision.com

Switching Level this slider bar and numeric

field control the switching point when the

camera switches from “Day” (color) into

“Night” (black & white) mode. Higher values

cause the camera to stay in “Day” mode at

lower illumination levels, lower values will

cause the camera to switch to “Night” mode

in higher illumination

Toggle Guard this slider bar and numeric

field control the level of brightness required

to switch from “Night” (black & white) into

“Day” (color) mode. Higher values will cause

the camera to stay in “Night” (black & white)

mode longer than lower values as

illumination levels rise. Toggle Guard should

be adjusted to prevent the mode from

toggling between “Night” and “Day” modes

in areas where transitional lighting exists in

the scene

Enable P-Iris this button enables the P-Iris

control function on the camera

Note: If “Enable P-Iris” is unchecked, the iris will

be fully open to the maximum. It may result in

less sharpness and artificial color under strong

light condition as the image shown below.

Binning control operation of the “binning”

function when using a 3, 5, or 10mp camera

model

i. Binning in day mode will place the

camera in binning mode when the

camera is in “Day” mode

ii. Binning in night mode will place the

camera in binning mode when the

camera is in “Night” mode

Downscaling user can downscale their desired

image resolution

Scaling Size sets down-scaling image size

Bekijk gratis de handleiding van Arecont Vision MegaView 2 AV2225PMTIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.