Arecont Vision MegaView 2 AV02CLB-100 handleiding

Bewakingscamera

Arecont Vision

45 pagina's

PDF beschikbaar

Handleiding

Contera Bullet | Installation Manual

Camera Power Up

CAUTION!

This product should be installed by a qualified service technician in accordance with the National

Electrical Code (NEC 800 CEC Section 60) or applicable local code. Wiring methods shall be in accordance

with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.

Wiring should be UL Listed and/or Recognized wire suitable for the application.

CAUTION!

Make the connections inside a watertight compartment. Isolate unused power wires individually.

After connections are made, ensure that the watertight compartment is tightly closed and cables and

conduits are properly sealed to prevent ingress of water.

CAUTION!

This product is intended to be supplied by a Listed Power Adapter or DC power source, rated

(1) 24 VAC , 0.416 A, 50/60Hz ;(2) 12-48 VDC, 0.83-0.2 A ;(3) 48 VDC, 0.27 A (for PoE), Tma = 50 °C, and

the altitude of operation = 2000m. If need further assistance with purchasing the power source, please

contact to ARECONT VISION COSTAR LLC for further information.”

1. Connect the camera to a PoE port on 100Mbps network PoE switch using an Ethernet cable.

2. If the camera is powered by an outside power supply, 12~48VDC or 24VAC (red and black wires),

connect the power cable.

3. Connect the PoE switch to your computer’s network port using an Ethernet cable.

LED

Status

Description

Green Quick Flashing Link has been established

Slow Flashing Normal operation

Bekijk gratis de handleiding van Arecont Vision MegaView 2 AV02CLB-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.