Arecont Vision MegaDome UltraHD AV12ZMD-401 handleiding

Bewakingscamera

Arecont Vision

39 pagina's

PDF beschikbaar

Handleiding

Page | 33 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

System Requirements

Computer with Windows XP/Vista/7 operating system, network access, and Microsoft Internet Explorer

web browser version 9.0 or later (32-bit).

Camera Discovery, Setup, and Configuration

For camera discovery and setup, the AV IP Utility is recommended. The software can be found on the

CD included with your camera or at: http://www.arecontvision.com/softwares.php.

The AV IP Utility has the ability to provide multiple discovery options, including broadcast and multicast,

check the status of a camera, change camera settings, import and export camera settings via a .csv

file, and update firmware and/or hardware from virtually anywhere with a network connection.

Whether used for large installations that require an update to multiple settings, or smaller installations

where only one camera needs changed, the AV IP Utility tool is efficient and convenient for mass or

single camera uploads.

The AV IP Utility tool is compatible with all Arecont Vision® megapixel cameras. The user manual for

the software is included on the CD that came with your camera or available on our website.

Network Protocols

The Arecont Vision MegaDome

UltraHD cameras support RTSP, RTP/TCP, RTP/UDP, HTTP, HTTPs,

DHCP, TFTP, QoS, IP version 4 (IPv4), and 802.1x.

RTSP – Cameras communicate with video management systems over Real Time Streaming Protocol.

Do not change the RTSP port unless you are sure your VMS does not use the default setting.

RTP/TCP – The Real-time Protocol/Transmission Control Protocol is best suited for applications that

require high reliability, and transmission time is relatively less critical.

RTP/UDP – The Real-time Protocol/User Datagram Protocol is used for live unicast video, especially

when it is important to always have an up-to-date video stream, even if some images are dropped.

HTTP – The Hypertext Transfer Protocol is an application protocol for distributed, collaborative,

hypermedia information systems.

HTTPs – Hypertext Transfer Protocol Secure: encrypts and authenticates communication between

Web server and browser.

DHCP – The Dynamic Host Configuration Protocol allows network administrators to centrally manage

and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP

address notification, or if the DHCP can update a DNS server.

Bekijk gratis de handleiding van Arecont Vision MegaDome UltraHD AV12ZMD-401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.