Arecont Vision MegaDome G3 AV5355PM-H handleiding

Bewakingscamera

Arecont Vision

41 pagina's

PDF beschikbaar

Handleiding

Installation Manual

Page | 13 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaDome

Wall Mount

For a proper wall mount installation, the AV-WMJB wall mount and MD-CAP wall mount cap are

required (sold separately). A wall mount should only be attached onto hard ceilings including

wood, plastic, metal, and concrete.

1. Using the Mounting template, prepare the mounting provisions for the camera installation.

2. Connect wall mount cap and wall mount as shown in Figure 1.

Figure 1: Attach wall mount cap to the wall mount

NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.

3. Attach the wall mount to the wall using the four drywall screws provided or any optional

hardware suitable for the mounting surface.

4. Run the Ethernet Cable and outside power cable (if necessary) through the supplied rubber

gasket and then through the wall mount. Ensure the gasket is seated properly.

5. Attach the mounting plate to the MD-CAP with the supplied screws as shown in Figure 2.

Figure 2

Bekijk gratis de handleiding van Arecont Vision MegaDome G3 AV5355PM-H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.