Arecont Vision MegaDome G3 AV10355PMTIR-SH handleiding
Handleiding
Je bekijkt pagina 15 van 41

Installation Manual
Page | 15 support@arecontvision.com
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com
MegaDome
®
G3
9. Attach the Dome Cover to the MegaDome
®
G3 camera and fasten securely four captive screws
as shown in Figure 6.
!
Figure 6
NOTE: When attaching the Dome Cover, make sure the IR foam on the lens not block the field
of view.
10. To configure the camera, reference the camera discovery, set-up and configuration section.
!
CAUTION! The captive screws must be used to properly secure the dome cover and
camera housing. Failure to use the captive fastener may result in serious injury. When
mounting the dome cover to the camera housing, ensure that the gasket is properly seated
and not folded. Failure to do so may result in water and dust ingress. Water damage from
improper installation is not covered by the warranty!
Bekijk gratis de handleiding van Arecont Vision MegaDome G3 AV10355PMTIR-SH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Arecont Vision |
Model | MegaDome G3 AV10355PMTIR-SH |
Categorie | Bewakingscamera |
Taal | Nederlands |
Grootte | 9455 MB |