Arecont Vision MegaDome G3 AV10355PMIR-SH handleiding
Handleiding
Je bekijkt pagina 32 van 41
Installation Manual
Page | 32 support@arecontvision.com
!
!
!
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com
MegaDome
®
G3
The Start and End times are visible once the camera starts recording as shown in Figure 3.
The start
time represents the beginning time of the oldest recording.
Figure 3
To playback recorded video:
• Input the date and time of the desired video (must be set between the Start and End time).
• Check the Playback SD card video checkbox to play the video.
Playback tips:
Video recorded to an SD card from an Arecont Vision camera can only be played back via an
Arecont Vision camera that has the same or lower resolution. Playback cannot be viewed with any
other device. For example, video recorded to an SD card via a 10MP camera can be played back
on a 3MP camera but a 3MP cannot be played back on a 10MP model.
• SD card must be inserted to any AV camera.
Bekijk gratis de handleiding van Arecont Vision MegaDome G3 AV10355PMIR-SH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arecont Vision |
| Model | MegaDome G3 AV10355PMIR-SH |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9455 MB |
