Arecont Vision MegaDome G3 AV10355PMIR-SH handleiding

Bewakingscamera

Arecont Vision

41 pagina's

PDF beschikbaar

Handleiding

Installation Manual

Page | 12 support@arecontvision.com

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com avsales@arecontvision.com

MegaDome

8. Fasten securely four captive screws as shown in Figure 5.

Figure 5

9. Attach the Dome Cover to the MegaDome

G3 camera and fasten securely four captive

screws.

NOTE: When attaching the Dome Cover, make sure the IR foam on the lens not block the field

of view.

10. To configure the camera, reference the camera discovery, set-up and configuration section.

CAUTION! The captive screws must be used to properly secure the dome cover and

camera housing. Failure to use the captive fastener may result in serious injury. When

mounting the dome cover to the camera housing, ensure that the gasket is properly seated

and not folded. Failure to do so may result in water and dust ingress. Water damage from

improper installation is not covered by the warranty!

Bekijk gratis de handleiding van Arecont Vision MegaDome G3 AV10355PMIR-SH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.