Arecont Vision MegaDome G3 AV05CLD-100 handleiding

Bewakingscamera

Arecont Vision

55 pagina's

PDF beschikbaar

Handleiding

Contera Outdoor Dome | Installation Manual

Wall Mount

For a proper wall mount installation, the AV-WMJB-W wall mount and MD-CAP-W wall mount cap are

required (sold separately). A wall mount should only be attached onto hard ceilings including wood, plastic,

metal, and concrete.

1. Using the Mounting template, prepare the mounting provisions for the camera installation.

2. Connect wall mount cap and wall mount.

NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.

3. Attach the wall mount to the wall using the four drywall screws provided or any optional hardware

suitable for the mounting surface.

4. Run the Ethernet Cable and outside power cable (if necessary) through the supplied rubber gasket

and then through the wall mount. Ensure the gasket is seated properly.

5. Attach the mounting plate to the MD-CAP-W with the supplied screws.

6. Prepare the network cable with the supplied grommet and insertion tool.

NOTE: When mounting the camera outdoors or in a wet environment, use of supplied grommet is

recommended. Ensure the grommet is properly seated flush with the camera housing.

Bekijk gratis de handleiding van Arecont Vision MegaDome G3 AV05CLD-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.