Arecont Vision ConteraIP Omni LX AV8476DN-NL handleiding

Bewakingscamera

Arecont Vision

56 pagina's

PDF beschikbaar

Handleiding

Page 11 of 54

Pendant Mount

For a proper pendant mount installation, the AV-PMJB-W pendant mount and SO-CAP-W mount cap are

required (sold separately). A pendant mount should only be attached onto hard ceilings including wood,

plastic, metal, and concrete.

1. Using the mounting template, prepare the mounting provisions for the camera installation.

2. Connect top shield, pendant pole and mount together as shown in Figure 1.

Figure 1: Attach the mount cap and pendant mount

NOTE: The thread size of top shield, pendant pole and mount is 1.5” NPT.

3. Attach the pendant mount to the ceiling using the four wood screws provided or any optional

hardware suitable for the mounting surface.

4. Run the Ethernet Cable and outside power cable (if necessary) through the supplied rubber

gasket and then through the pendant. Ensure the gasket is seated properly.

Figure 2: Attach the camera to the SO-CAP-W with the supplied screws

5. To configure the camera, reference the camera discovery, set-up and configuration section.

Bekijk gratis de handleiding van Arecont Vision ConteraIP Omni LX AV8476DN-NL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.