Arecont Vision ConteraIP Omni LX AV20476DN-28 handleiding

Bewakingscamera

Arecont Vision

56 pagina's

PDF beschikbaar

Handleiding

Page 6 of 54

If mounting the camera outside or in a wet environment, thread the camera cable through the hole on the

supplied rubber gasket and align with the three holes on the top of the housing. Ensure the gasket is

properly seated flush with the camera housing.

Figure 2: Mount the Surface mount to the wall or ceiling using the three holes on the housing

NOTE: If you use the side connection of the NPT port, remove the cap covering the side entrance,

otherwise; leave the cap in place. If using the NPT port, always use Teflon tape around the threads

to ensure proper sealing. The conduit fits ¾” NPT standard. Ensure NPT port is facing downward.

Using the three holes on the top of the camera housing, use the supplied screws and attach to the

mounting surface.

Bekijk gratis de handleiding van Arecont Vision ConteraIP Omni LX AV20476DN-28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.