Arecont Vision ConteraIP Indoor Dome AV02CID-100 handleiding

Bewakingscamera

Arecont Vision

38 pagina's

PDF beschikbaar

Handleiding

ConteraIP Indoor Dome | Installation Manual

Alarm Schedule Configures the alarm schedule by holding down the

mouse button and clicking the time block to enable the

schedule settings on the selected time. A light blue

color on the time block indicates that the alarm

schedule is enabled, while a light grey color indicates

that the alarm schedule is disabled.

Alternatively, you can manually enter numbers to

configure the hours and minutes from start to end for

all weekdays.

S: Click “S” to set up a 24-hour schedule for a

particular day.

D: Click “D” to clear the previous schedule for a

particular day.

*This function is supported

depends on models.

Trigger Alarm Detection When a signal is detected from Alarm in, the Alarm out

will be triggered.

Trigger Motion Detection When a motion detection event is detected, the Alarm

out will be triggered.

Trigger Tamper Detection When a tamper detection event is detected, the Alarm

out will be triggered.

Type Selects the type: N.O (Normal Open) or N.C (Normal

Close)

Off Time Specifies the alarm duration

Enable Tampering

Detection

Enables Tampering Detection function.

Tampering Schedule Configures the alarm schedule by holding down the

mouse button and clicking the time block to enable the

schedule settings on the selected time. A light blue

color on the time block indicates that the alarm

schedule is enabled, while a light grey color indicates

that the alarm schedule is disabled.

Alternatively, you can manually enter numbers to

configure the hours and minutes from start to end for

all weekdays.

S: Click “S” to set up a 24-hour schedule for a

particular day.

D: Click “D” to clear the previous schedule for a

particular day.

Bekijk gratis de handleiding van Arecont Vision ConteraIP Indoor Dome AV02CID-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.