Arecont Vision ConteraIP Indoor Dome AV02CID-100 handleiding

Bewakingscamera

Arecont Vision

38 pagina's

PDF beschikbaar

Handleiding

ConteraIP Indoor Dome | Installation Manual

Alarm I/O Functions

Connect the Alarm In (DI) connector to the alarm input sensor, and connect Alarm Out (DO) connector to the

alarm output signal. To avoid any damaged, please follow the specification of the part as below:

Alarm In (Dry Contact)

Alarm Out (Dry Contact)

V sense

I sense

5V±5% 3.3V±5% 10mA (max)

Reset to Factory Default

1. Press and hold the reset button for 2 to 5 seconds and release the reset button. The camera has

been reset to the factory default except the network settings.

2. Press and hold the reset button for more than 5 seconds and release the reset button. The camera

has been reset to the factory.

3. Or, user can reset the camera to factory default via camera web interface or AV IP Utility

Bekijk gratis de handleiding van Arecont Vision ConteraIP Indoor Dome AV02CID-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.