Arecont Vision ConteraIP Fisheye AV12CPD-236 handleiding
Handleiding
Je bekijkt pagina 65 van 83
64
Ports & Devices
The RS485 serial port is used for data exchange with the third-party device. Serial port
settings on the camera should be consistent with that of the connected third-party device.
Transparent channel
Use the RS485 serial port to achieve transparent data transmission with the third-party
device. Transparent channel is mainly used to achieve transparent data transmission
between two devices.
NOTE!
Make sure that you have set
Port Mode to Trans-Channel for your camera.
1. Click Setup > System > Ports & Devices, and then click the Serial Port tab.
2. Select Trans-Channel from the Port Mode drop-down list.
3. Select Enable for Trans-Channel.
4. Enter the destination IP address and port number (IP address and port number that
the transparent channel connects to).
5. Click Save.
OSD
To display information from the third-party device on the OSD, you need to select OSD
as the port mode.
The camera receives information from the third-party device through the RS485 serial
port, translates the received information, and then displays it on the OSD.
Bekijk gratis de handleiding van Arecont Vision ConteraIP Fisheye AV12CPD-236, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arecont Vision |
| Model | ConteraIP Fisheye AV12CPD-236 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 15479 MB |
