Arecont Vision ConteraIP Fisheye AV12CPD-236 handleiding
Handleiding
Je bekijkt pagina 62 van 83
61
2. Select the check box to enable the ARP binding function and set the gateway MAC
address.
3. Click Save.
IP Address Filtering
Use IP address filtering to allow or forbid access from specified IP address(es).
1. Click Setup > Security > Network Security > IP Address Filtering.
2. Select On to enable IP address filtering.
3. Select a filtering mode, and then add IP address(es).
4. Click Save.
NOTE!
If Filtering Mode is set to Whitelist, then only the added IP address(es) are
allowed to access the camera. If Filtering Mode is set to Deny Access, then only
the added IP address(es) are not allowed to access the camera.
Up to 32 IP addresses are allowed. Each IP address can be added once only.
The first byte of each IP address must be 1-223, and the fourth cannot be 0. For
example, the following IP addresses are illegal and cannot be added: 0.0.0.0,
127.0.0.1, 255.255.255.255, 224.0.0.1.
Bekijk gratis de handleiding van Arecont Vision ConteraIP Fisheye AV12CPD-236, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arecont Vision |
| Model | ConteraIP Fisheye AV12CPD-236 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 15479 MB |
