Arecont Vision ConteraIP Fisheye AV12CPD-236 handleiding

Bewakingscamera

Arecont Vision

83 pagina's

PDF beschikbaar

Handleiding

Configuring Audio Detection Alarm

The camera can detect input audio signals for exceptions. When the rise or fall of volume

exceeds the set limit, or when the input volume reaches the threshold, the camera

reports an alarm and triggers the set actions. Make sure that an audio input device is

correctly connected to the camera and audio input is turned on in

Configuring Alarm

Input.

1. Click Setup > Events > Common Alarm >Audio Detection tab.

2. Select Enable for Audio Detection, select a detection type and set the difference or

threshold. To disable audio detection, clear the Enable check box.

The following table describes some major parameters.

Parameter

Description

Detection

Type



Sudden Rise: An alarm is reported when the rise of volume exceeds the

difference.

 Sudden Falls

: An alarm is reported when the fall of volume exceeds the

difference.

 Sudden Change: An alarm is reported when the rise or fall of volume exceeds

the difference.

 Threshold: An alarm is reported when the volume exceeds a threshold.

Difference



Threshold: After a volume is set as the threshold, an alarm is reported when

the threshold is exceeded.



Difference: the difference between two volumes. When the rise or fall of

volume exceeds the difference, an alarm is reported.

Note:

 The scale in the audio detection area is used to measure sound volume.

Bekijk gratis de handleiding van Arecont Vision ConteraIP Fisheye AV12CPD-236, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.