Arecont Vision ConteraIP Fisheye AV12CPD-236 handleiding

Bewakingscamera

Arecont Vision

83 pagina's

PDF beschikbaar

Handleiding

3. In the Detection Area area, click to add a new detection area. To delete a detection

area, click .

4. Click and drag the mouse to set a detection area.

5. Set the detection sensitivity, object size, and history for the camera to decide whether to

report a motion detection alarm.

 Moving the slider to the right increases detection sensitivity. When the extent of motion

within the detection area exceeds the set object size, the camera reports an alarm.

 Object size specifies the minimum ratio of the object's size to the size of the total

detection area before an alarm will be reported. That is to say, to detect motion of tiny

objects, you need to draw a small box (detection area) in the actual motion area accordingly.

 Motion detection results are shown in real time. The red lines represent the raised

motion detection alarms. The longer a line, the greater the extent of motion. The denser

the lines, the greater the frequency of motion.

6. Set the alarm parameters.

 Suppress Alarm(s): After an alarm is triggered, the same alarm will not be reported

within the set time.

 Clear Alarm(s): After an alarm is triggered,

• If the same alarm is not triggered within the set time, the alarm will be cleared and the

same alarm can be reported again.

• If the same alarm is triggered within the set time, the alarm will not be cleared until the

suppress alarm time expires. Then the same alarm can be reported again.

7. Set actions to be triggered by motion detection alarm and the plan.

The following table describes the major alarm-triggered actions and how to set a plan.

Bekijk gratis de handleiding van Arecont Vision ConteraIP Fisheye AV12CPD-236, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.