ARCTIC WIND 3AWH8000A handleiding
Handleiding
Je bekijkt pagina 12 van 28
12
LABELLING
• Equipment should be labelled stating that it
has been de-commissioned and emptied of
refrigerant. The label should be dated and
signed. Ensure that there are labels on the
equipment stating the equipment contains
ammable refrigerant.
RECOVERY
• When removing refrigerant from a system,
either for servicing or decommissioning, it is
recommended good practice that all refrigerants
are removed safely.
• When transferring refrigerant into cylinders,
ensure that only appropriate refrigerant recovery
cylinders are employed. Ensure that the correct
number of cylinders for holding the total system
charge is available. All cylinders to be used are
designated for the recovered refrigerant and
labelled for that refrigerant (i.e. special cylinders
for the recovery of refrigerant). Cylinders shall
be complete with pressure relief valve and
associated shut-o valves in good working
order. Empty recovery cylinders are evacuated
and, if possible, cooled before recovery occurs.
• The recovery equipment shall be in good
working order with a set of instructions
concerning the equipment that is at hand and
shall be suitable for the recovery of ammable
refrigerants. If in doubt, the manufacturer should
be consulted. In addition, a set of calibrated
weighing scales shall be available and in good
working order.
• Hoses shall be complete with leak-free
disconnect couplings and in good condition.
• The recovered refrigerant shall be processed
according to local legislation in the correct
recovery cylinder, and the relevant waste
transfer note arranged. Do not mix refrigerants
in recovery units and especially not in cylinders.
If compressors or compressor oils are to be
removed, ensure that they have been evacuated
to an acceptable level to make certain that
ammable refrigerant does not remain within
the lubricant. The compressor body shall not
be heated by an open ame or other ignition
sources to accelerate this process. When oil
is drained from a system, it shall be carried
out safely.
WARNING
For using R32 refrigerant
(Continued)
IMPORTANT SAFETY INSTRUCTION
IMPORTANT NOTICE:
WARRANTY VOID
FOR IMPROPER INSTALLATION
Please note that the warranty for the
window air conditioner will be void if it is
installed in a wall sleeve through a wall
opening that will block any air vents, or
any other type of installation method not
specied in this user manual.
To ensure proper functioning and to maintain
the validity of the warranty, it is crucial to strictly
adhere to the installation procedure outlined in
this user manual. Failure to do so may lead to
damage or malfunctioning of the unit.
For detailed instructions on the correct
installation process, please refer to the
'Installation Instruction' section of this user
manual. Following these guidelines will help
guarantee optimal performance and protect
your warranty coverage.
If you have any questions or require further
assistance, please don't hesitate to contact
our US based customer service team at
855-663-9463. We are here to help ensure
your satisfaction and maximize the longevity
of your window air conditioner.
Bekijk gratis de handleiding van ARCTIC WIND 3AWH8000A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARCTIC WIND |
| Model | 3AWH8000A |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4452 MB |
