ARCTIC WIND 3AWH12000A handleiding
Handleiding
Je bekijkt pagina 7 van 28
7
IMPORTANT SAFETY INSTRUCTION
(Continued)
• Be sure the air conditioner has been securely
and correctly installed according to the
installation instructions in this manual.
• Save this manual for possible future use in
removing or installing this unit.
• When handling the air conditioner, be careful to
avoid cuts from sharp metal ns on front and
rear coils.
ELECTRONIC WORK
WARNING
BEFORE PERFORMING ANY ELECTRICAL OR
WIRING WORK, TURN OFF THE MAIN POWER TO
THE SYSTEM
WARNING
For using R32 refrigerant
• Do not use means to accelerate the defrosting
process or to clean, other than those
recommended by the manufacturer.
• The appliance shall be stored in a room without
continuously operating ignition sources
(for example: open ames, an operating gas
appliance or an operating electric heater).
• Do not pierce or burn.
• Be aware that the refrigerants may not contain
an odor.
• Appliance should be installed, operated and
stored in a room with a oor area according to
the amount of refrigerant to be charged. For
specic information on the type of gas and
the amount, please refer to the relevant label
on the unit itself. When there are dierences
between the label and the manual on the Min.
room area description, the description on label
shall prevail.
NOTE: The cographs are for explanation
purpose only. Your machine may be slightly
dierent. The actual shape shall prevail.
DISPLAY
MAIN
CONTROL
POWER SUPPLY
CORD
• Appliance shall be installed, operated and
stored in a room with a oor area larger than
43 sq. ft. (4 m
2
). Appliance shall not be installed
in an unvertilated space, if that space is smaller
than 43 sq. ft. (4 m
2
).
• No open re or device like switch which
may generate spark/arcing shall be around
appliance to avoid causing ignition of the
ammable refrigerant used. Please follow
the instructions carefully when storing
or maintaining the appliance to prevent
mechanical damage from occurring.
• Servicing should only be performed as
recommended by the equipment manufacturer.
Maintenance and repair requiring the
assistance of other skilled personnel shall be
carried out under the supervision of the person
competent in the use of ammable refrigerants.
• DO NOT modify the length of the power cord
or use an extension cord to power the unit.
• DO NOT share a single outlet with other
electrical appliances. Improper power supply
can cause re or electrical shock. When
maintaining or disposing the appliance, the
refrigerant shall be recovered properly, shall
not discharge to air directly.
• Compliance with national gas regulations shall
be observed.
• Keep ventilation openings clear of obstruction.
• The appliance shall be stored so as to prevent
mechanical damage from occurring.
• A warning that the appliance shall be stored
in a well-ventilated area where the room size
corresponds to the room area as specied for
operation.
• Any person who is involved with working on
or breaking into a refrigerant circuit should
hold a current valid certicate from an
industry-accredited assessment authority,
which authorizes their competence to handle
refrigerants safely in accordance with an
industry recognized assessment specication.
All training shall follow the ANNEX HH
requirements of UL 60335-2-40.
Examples for such working procedures are:
- breaking into the refrigerating circuit;
- opening of sealed components;
- opening of ventilated enclosures.
Bekijk gratis de handleiding van ARCTIC WIND 3AWH12000A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARCTIC WIND |
| Model | 3AWH12000A |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4452 MB |
