ARCTIC WIND 3AWH12000A handleiding
Handleiding
Je bekijkt pagina 15 van 28
15
INSTALLATION INSTRUCTIONS
STEP 1
UNIT INSTALLATION
RIGHT
LEFT
What you need:
1. Install the top rail on 3AWH12000A.
The top rail is preinstalled on 3AWH8000A.
Install the Top Rail on 3AWH12000A
(12,000 BTU) with 4 Screws (3/8in),
for safety reasons, all 4 screws MUST
be securely fastened.
2. Pull the panels out around.
RIGHT
Pull the Left & Right Panels out half way around.
3. Install the accordion panels.
Insert the card slot on the side of the AC,
pay attention to the left and right dierences
of the Panel.
NOTE: Top rail and Sliding Panels at each
side are oset to provide the proper pitch
to the rear of (5/16 "). This is necessary for
proper condensed water utilization and
drainage. If you are not using the Side
Panels for any reason, this pitch to the rear
must be maintained.
(Continued)
Bekijk gratis de handleiding van ARCTIC WIND 3AWH12000A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ARCTIC WIND |
| Model | 3AWH12000A |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4452 MB |
