Handleiding
Je bekijkt pagina 93 van 108
EN / 93
26.Select Scan option, and press the .
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
Notes:
• Use installation equipment supported /
suggested by the SCR router.
• Other users / receivers connected to the
system may be affected if the specified
user band number and frequency are
changed during installation.
• User band and User band frequency are
specified on the SCR router used; and
each user / receiver must select a spe-
cified user band and user band fre-
quency.
• With SCR satellite system, auto search by
several users / receivers at the same
time may cause problems.
27.Press to return to the previous menu,
press to return to TV broadcast or
press to return to Home menu.
20.5 Motorized Antenna Settings
LNB settings described in the fol-
lowing section require significant
expertise on satellite systems. Con-
tact an expert about the subject.
Your TV supports DiSEqC 1.2 motorized
satellite systems. With this feature, you can
control the satellite on your television.
Adjust the satellite antenna position for
each satellite. By storing these settings, the
antenna can be moved to a previously
saved location when needed.
1. In TV mode, press the , select Source
and press the .
2. Select Satellite and press the .
3. Press the , select Settings and press
the .
4. Select Channels & Inputs option and
press.
5. Select Channels option, and press the
.
ð Channel menu will be displayed.
6. Select Satellite and press the .
7. Select Channel Installation Mode op-
tion, and press the .
8. Select Satellite (Standard) if you are us-
ing an operator, select Satellite (Oper-
ator Mode), and press the .
9. Select Automatic Channel Scan option,
and press the .
ð Satellite Antenna Type menu will be
displayed.
Satellite Antenna Type
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
Single Cable II
Single Cable
10.Select DiSEqC 1.2 and press the .
11.Select My Longitude option, and press
the . Then enter your longitude with
the
...
.
12.Select My Latitude option, and press the
. Then enter your latitude with the
...
.
13.Select Next option and press the .
14.Select the satellite you want to search
for and press the .
15.Select LNB Settings and press the .
16.Select Motor Settings and press the .
ð Motor Settings menu will be displayed.
Bekijk gratis de handleiding van Arcelik A65 E 895 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arcelik |
| Model | A65 E 895 A |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 10639 MB |
