Handleiding
Je bekijkt pagina 91 van 108
EN / 91
18.Select Store Type.
ð Select Only Digital Channels for TV
channels only
ð Select Only Radio Channels for radio
channels only
ð Select All for scanning both options.
19.Select LNB Settings and press the .
20.Select the required options with the
/
.
ð LNB Power: Press , select LNB power
and press .
ð LNB Frequency: Press and select
LNB frequency used in the satellite sys-
tem and press again the .
21.DiSEqC 1.0 Port: Press .
ð DiSEqC 1.0 Port menu will be dis-
played.
LNB Settings
Signal Level
Signal Quality
100
100
Off
DiSEqC A
DiSEqC B
DiSEqC C
DiSEqC 1.0 Port
DiSEqC A
DiSEqC D
22.To select the satellite corresponding to
the relevant DiSEqC positions in the
satellite system, select DiSEqC A, DiS-
EqC B, DiSEqC C or DiSEqC D.
Note:
• If Antenna Type, DiSEqC 1.1 is selected,
make a selection between DiSEqC:1 and
DiSEqC:16.
23.Return to the Automatic Channel Scan
menu by pressing the twice.
Note:
• Make the settings described in steps 16
to 20 for other three satellites you want
to scan.
24.After completing the settings, use Satel-
lite Selection menu to select Next and
press .
ð Channel Scan menu will be displayed.
25.Select Scan and press the .
ð TV channel scan will start.
ð Search may take several minutes de-
pending on the number of television
stations received.
26.Press to return to the previous menu,
press to return to TV broadcast or
press to return to Home menu.
20.4 Antenna Settings for Digital
Satellite Channels and Search-
ing for Channels Automatically
with the Single Channel Router
(SCR) system
Your TV supports SCR (Single
Channel Router) system. SCR
(Single Channel Router - EN 50494).
LNB settings described in the fol-
lowing section require significant
expertise on satellite systems. Con-
tact an expert about the subject.
1. In TV mode, press the , select Source
and press the .
2. Select Satellite and press the .
3. Press the , select Settings and press
the .
4. Select Channels & Inputs option and
press.
5. Select Channels option, and press the
.
ð Channel menu will be displayed.
6. Select Satellite and press the .
7. Select Channel Installation Mode op-
tion, and press the .
8. Select Satellite (Standard) if you are us-
ing an operator, select Satellite (Oper-
ator Mode), and press the .
9. Select Automatic Channel Scan option,
and press the .
ð A warning message will be displayed.
Bekijk gratis de handleiding van Arcelik A65 E 895 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arcelik |
| Model | A65 E 895 A |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 10639 MB |
