Handleiding
Je bekijkt pagina 89 van 108
EN / 89
19.Select Scan option, and press the .
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
Note:
• If some of the frequencies are not stored
completely due the changes parameters
satellite parameters made by the broad-
caster, it is recommended to set the Scan
Mode as Network.
20.Press to return to the previous menu,
press to return to TV broadcast or
press to return to Home menu.
20.2 Manual Search for Digital Tele-
vision Channels with Single
Satellite Connection
If a certain channel cannot be found with
automatic scan, scan it by manual scan.
You must enter all parameters of the chan-
nel correctly. You can obtain the current
transponder information from Teletext
page, satellite TV magazines or internet.
If there is a direct cable connection
from your satellite antenna to the
TV set, and if there is no common
satellite antenna switchboard, you
need to search over a single cable.
1. In TV mode, press the , select Source
and press the .
2. Select Satellite and press the .
3. Press the , select Settings and press
the .
4. Select Channels & Inputs option and
press.
5. Select Channels option, and press the
.
ð Channel menu will be displayed.
6. Select Satellite and press the .
7. Select Channel Installation Mode op-
tion, and press the .
8. SelectSatellite (Standard) , or select
Satellite (Operator Mode) if you are us-
ing an operator and press .
9. Press the to return to the previous
menu.
10.Select Satellite Manual Tuning option,
and press the .
11.Select Current Satellite and press the
ð Transponder Settings menu will be dis-
played.
Transponder Settings
Vertical
Please set the transponder's parameters
Signal Level
Signal Quality
100
100
Next
Frequency
Symbol Rate (Ksym/s)
Polarization
27500
12380
12.Press the
/
to select the required
items and press the to confirm.
ð Frequency - Enter the channel fre-
quency in 5 digits with the
...
.
ð Symbol - Enter the channel symbol rate
in 5 digits with the
...
.
ð Select Polarization - Channel Hori-
zontal or left, Vertical or right.
13.Press the to return to the previous
menu.
14.Select Next option and press the .
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
15.After completing the settings, use Satel-
lite Selection menu to select Next and
press .
ð Channel Scan menu will be displayed.
Bekijk gratis de handleiding van Arcelik A65 E 895 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arcelik |
| Model | A65 E 895 A |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 10639 MB |
