Aquasure Harmony Lite AS-HL34FM handleiding

Niet gecategoriseerd

Aquasure

36 pagina's

PDF beschikbaar

Handleiding

www.AQUASUREUSA.com

Tel: 1-800-661-0680

Press the ENTER button

to accept and continue.

Press UP or DOWN buttons

to change units.

Setting 3 - Unit Capacity (Not shown if Timer Mode was selected in 2nd Step)

Set Unit Measurement - Gallons, Liters or Cubic Meters (Recommend setting to Gallons for US Customer)

Gallons

(Recommended)

Liters Cubic Meters

Press the ENTER key to adjust the

unit capacity setting.

IMPORTANT! This setting will only appear if the either (M ) Meter or (tM) Time Meter mode from

the previous setting was selected. User will not see this setting if (t) Timer mode was selected.

The system default is 1000 gallons with the option to change the unit measurement and the

capacity of the water treated before the system goes through a regeneration. It is recommended

to set the unit of measurement at (gAL) gallons and also calculate the correct amount of gallons

the system can treat by going through the worksheet on page 21 of owner’s manual or by

visiting our website https://aquasureusa.com/calculationtool

Press the ENTER button

to accept, and the number

to the left ashes.

Press UP or DOWN buttons

to set water capacity.

L M3

gAL

Flashing

SEt- 3 C-U

11:30

Flashing

01000 gAL

11:30

Flashing

5 4 3 2 1

01000 gAL

11:30

Bekijk gratis de handleiding van Aquasure Harmony Lite AS-HL34FM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.