Aquasure Harmony AS-HS64FMP handleiding
Handleiding
Je bekijkt pagina 8 van 36
5
www.AQUASUREUSA.com
Tel: 1-800-661-0680
4. Pre-install environment checklist
(Continued)
• A 120 volt electric outlet must be within 6 feet of the softener. The transformer has an
included 8 foot power cable. Be sure the electric outlet and transformer are protected
from water and wet weather.
• If installing outside, necessary steps must be taken to ensure the softener, installation
plumbing, wiring, etc. are protected from the elements and contamination sources.
• Handle with care when moving the water softening system. Do not drop, drag, or set on
areas with sharp protrusions.
• The system works on standard 120v power plug only. Do not use any other transformer
except the one that is included with the system.
• Transformer must be plugged into an indoor 120 volt, grounded outlet.
• Use only clean water softening salt with at least 99.5% purity. Extra course grade or
crystal salt is recommended. Do not use rock, block or granulated salts. These contain
contaminants that could cause problems during maintenance.
• Always keep salt lid in place on the softener unless servicing or relling the unit.
• Some applications may not have a level surface to place the tank. The oating base allows
the tank to be leveled within the base and ensures proper operation.
CORRECT CORRECTINCORRECT INCORRECT
Bekijk gratis de handleiding van Aquasure Harmony AS-HS64FMP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aquasure |
| Model | Harmony AS-HS64FMP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7396 MB |
