Aquasure Harmony AS-HS64FMP handleiding
Handleiding
Je bekijkt pagina 15 van 36
12
AQUASURE HARMONY SERIES
1. Place the unit in the bypass position. Locate the nearest faucet and remove aerator
(faucet screen) if there is any. Turn the cold water position on at the nearest faucet and
slowly turn on the main water supply. Let the water run for a few minutes or until the
system is free of any air or foreign material.
2. Make sure there are no leaks in the plumbing system before proceeding and shut off the
nearest faucet when water runs clear.
Service
Position
Bypass
Position
WARNING! If the system is leaking at all, turn the unit to the bypass position and shut off main
water supply before assessing leak.
STEP 5. Flushing and Testing the Plumbing Lines
IMPORTANT! Flushing the system lines is necessary to ensure that all plumbing work has been
done correctly, that there is no debris or air trapped in the piping, and that there are no leaks.
IMPORTANT! The system is not ready for service until you complete the “System Startup”
section of the owner’s manual.
(Page 13)
Bekijk gratis de handleiding van Aquasure Harmony AS-HS64FMP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aquasure |
| Model | Harmony AS-HS64FMP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7396 MB |
