Aputure STORM 1200x handleiding
Handleiding
Je bekijkt pagina 37 van 40
37
Safety Instructions
When using this product, basic safety precautions should always be followed, including:
1. Read and understand all instructions before using the fixture.
2. Close supervision is necessary when any fixture is used by or near children. Do not leave the
fixture unattended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if any cord is damaged, or if the fixture has been dropped or
damaged, until it has been examined by qualified service personnel.
5. Position any power cables such that they will not be tripped over, pulled, or put into contact
with hot surfaces.
6. If an extension cord is necessary, a cord with an amperage rating at least equal to that
required by the fixture should be used. Cords rated for less amperage will overheat.
7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or
when not in use. Never yank the cord to remove the plug from the outlet.
8. Let the lighting fixture cool completely before storing. Unplug the cables from the lighting
fixture and store them in assigned spaces of the carrying case (if being used).
9. Do not immerse this fixture in water or any other liquid to avoid electric shock.
10. Do not disassemble the fixture to avoid the risk of fire or electric shock. Contact
cs@aputure.com or take the lighting fixture to qualified service personnel when service or
repair is required. Incorrect reassembly may cause electric shock when the lighting fixture is in
use.
11. Using any accessory attachment not recommended by the manufacturer may increase the
risk of fire, electric shock or injury to any persons operating the fixture.
12. Power this fixture by connecting it to a grounded outlet.
13. Remove the Protective Cover before use.
14. Do not block the ventilation openings or look at the LED light source directly when it is
powered on. Do not touch the LED light source in any condition.
15. Do not place the product near combustible and volatile solvents to avoid product damage.
16. Use a soft and dry cloth to clean the device.
17. Ensure all the ports and plugs are completely dry when using the fixture in wet
environments to avoid short circuit or electric shock.
18. Service and maintenance should only be carried out by authorized service personnel. Any
malfunctions caused by unauthorized disassembly are not covered by the warranty. The user
may pay for service and maintenance.
19. When hanging the fixture overhead, always ensure an extra safety measure has been
attached -such as safety chains- that is certified for the weight of the fixture. We recommend
only using the original Aputure cable accessories. Please note that any malfunctions caused
by using unauthorized accessories are not covered by the warranty. The user may pay for
service and maintenance. When hanging the fixture overhead, always ensure an extra safety
measure has been attached -such as safety chains- that is certified for the weight of the
fixture.
20. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full
compliance with relevant country's standards. Any malfunctions caused by incorrect use are
not covered by the warranty. The user may pay for service and maintenance.
21. The User’s Manual was formulated based on rigorous tests performed by the Company.
No further notice will be given in the event of any change in its design and specifications.
Do not touch the LED
Bekijk gratis de handleiding van Aputure STORM 1200x, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aputure |
| Model | STORM 1200x |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4339 MB |
