Aputure INFINIMAT 8×8 handleiding
Handleiding
Je bekijkt pagina 54 van 57
Important
Safety Instructions
---------------
When using this product, basic safety precautions should always be followed, including:
1. Read and understand all instructions before using the fixture.
2. Close supervision is necessary when any fixture is used by or near children. Do not leave
the fixture unattended while
in
use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if any cord is damaged, or if the fixture has been dropped or
damaged, until it has been examined by q ualified service personnel.
5. Position any power cables such that they will not be tripped over, pulled, or put into con
tact with hot surfaces.
6. lf an extension cord is necessary, a cord with an amperage rating at least equal to that
required by the fixture should be used. Cords rated for less amperage will overheat.
7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing,
or when not in use. Never yank the cord to remove the plug from the outlet.
8. Let the lighting fixture cool completely before storing. Unplug the cables from the lighting
fixture and store them in assigned spaces of the carrying case (if being used).
9. Do not immerse this fixture in water or any other liquid to avoid electric shock.
10. Do not disassemble the fixture to avoid the risk of fire or electric shock. Contact cs@apu
ture.com or take the lighting fixture to qualified service personnel when service or repair
is required. Incorrect reassembly may cause electric shock when the lighting fixture is in
use.
11. Using any accessory attachment not recommended by the manufacturer may increase
the risk of fire, electric shock or injury to any people operating the fixture.
12. Power this fixture by connecting it to a grounded outlet.
13. Do not block the ventilation openings or look at the LED light source directly when it is
powered on.
Q
_
Do not touch
the LED
14. Do not place the product near combustible and volatile solvents to avoid product damage.
15. Use a soft and dry cloth to clean the device.
16. Ensure all the ports and plugs are completely dry when using the fixture in wet environ
ments to avoid short circuit or electric shock.
17. Service and maintenance should only be carried out by authorized service personnel. Any
malfunctions caused by unauthorized disassembly are not covered by the warranty. The
user
may pay for service and maintenance.
54
Bekijk gratis de handleiding van Aputure INFINIMAT 8×8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aputure |
| Model | INFINIMAT 8×8 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 10465 MB |
