Aputure INFINIMAT 8×8 handleiding
Handleiding
Je bekijkt pagina 42 van 57
2.2.13 Update Firmware
You
can upgrade the firmware
by inserting a USB flash drive
with
the latest firmware on its
root drive into the USB-A port of the Control Box . The current firmware version is also listed
in this interface. NOTE: The fixture can also be updated via Sid us Link with Sid us
BT
turned
ON and a Wi-Fi internet connection on your Sidus
Link
device. Remember to
update both the
Control Box and the connected Lamp Heads with any new firmware.
System Settings
< ii
-
O>
-
Update
Firmware
2.2.14 Factory Reset
Select ''YES" if you wish to Factory Reset the fixture. Select "NO" to cancel.
You can choose Pixel Order Check, Reset CRMX, Reset Sidus BT or Default Language.
You may also press the Menu button for 5 seconds for a Factory Reset shortcut to appear.
Factory Settings:
Light
Mode: CCT
Intensity: 50%
CCT:5600K
Language: English
Fan Mode: Smart
Dimming Curve: Linear
Studio Mode:
OFF
Control System: Bluetooth enabled, CRMX disabled
DMX: Channel 001
DMX
Loss
Behavior:
Hold Last
Look
DMX Termination: Off
Sidus BT: ON
CRMX:OFF
42
Bekijk gratis de handleiding van Aputure INFINIMAT 8×8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aputure |
| Model | INFINIMAT 8×8 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 10465 MB |
