Appsys ProAudio AUX-TDM handleiding
Handleiding
Je bekijkt pagina 3 van 10
AUX-TDM
1. DESCRIPTION
The AUX-TDM card provides up to 64x64 channels Time Division Multiplexing
(TDM) interface on a 3.3V LVCMOS I/O. It supports four lines of data plus
BCLK/LRCLK/MCLK/MUTE outputs, and four lines of data plus BCLK/LRCLK/MUTE
inputs.
It can be fitted into every flexiverter (FLX) device for the following purposes:
to use the FLX as standalone converter between the built-in interface and this
extension card
to add extra output splits to existing FLX devices by "tapping" channels of
another conversion
to add additional channels/protocols to the FLX when it is used in double-
flexiverter or flexiverter+multiverter configurations
For a detailed description of possible configurations, please refer to the manual of
your base FLX device.
1.1. Box Contents
1 AUX-TDM card
1 Slot cover plate
34-pin, 0.635mm pitch ribbon cable, 30cm/1ft.
This manual
2. INSTALLATION
2.1. Opening the flexiverter
Required: Torx T10 screwdriver
Power off the device and detach all cables to avoid short-circuit or damage
Detach the device from the rack-mount kit
Remove the four top screws and the top cover by pulling it upwards:
3
Bekijk gratis de handleiding van Appsys ProAudio AUX-TDM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Appsys ProAudio |
| Model | AUX-TDM |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 856 MB |
