API Audio Select T12 handleiding
Handleiding
Je bekijkt pagina 12 van 18
T12 Tube Mic Preamp API Select
10
9.0 Power Switch & Rear Panel Connections
9.1 Power Switch
The power switch for the T12 Mic Preamp is located on the right side of the front panel.
Power: Toggle to power the T12 ON and off
NOTE: The T12 is a tube-based processor that requires 15 minutes for the
tubes to warm-up to a stable temperature before tonal qualities become
consistent.
9.2 Rear Panel
The rear panel of the T12 Mic Preamp provides audio inputs and outputs for both channels connections,
as well as AC power connection, voltage selection, and fuse.
9.2.1 Audio Connections
Each audio channel, Left and Right, has INPUT and OUTPUT rear panel connections.
IMPORTANT NOTE: Care should be taken not to
short the outputs, as damage will occur
to the output stage.
9.2.2 AC Power
The AC power connection, fuse, and voltage selection switch is located on the rear panel of the T12.
115/230V~: Voltage selection switch
Fuse: 0.5A/0.25A 250V
• 115VAC value factory installed
• Change to appropriate value for 230VAC operation
AC Power Connection: Standard IEC power cable
Bekijk gratis de handleiding van API Audio Select T12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | API Audio |
| Model | Select T12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2518 MB |
