API Audio 527A handleiding
Handleiding
Je bekijkt pagina 11 van 16
527A Compressor/Limiter API
9
7.0 Compressor Bypass (IN)
The 527A is equipped with a relay-based, hard-wired IN switch and hard bypass.
A momentary press of the IN switch toggles the IN function. When the compressor is IN, the
compressor processes audio and behaves normally. This is indicated by the IN switch being
illuminated in yellow. When IN is disengaged (switch not illuminated), the control voltage signal is
disengaged and the output signal is held at 0dB, but audio continues to pass through the 527A
electronics without any gain reduction.
Press-and-hold the IN switch to toggle the BYPass control. When the compressor is in BYPass, the
hard-wired bypass is engaged and the IN switch illuminates in red. In this state, the audio INPUT
signal is routed directly to the audio OUTPUT connectors and do not pass through the 527A
electronics.
IN/BYP (Bypass): Press to engage the compressor or the hard-wired bypass
• IN: Press to engage the compressor in signal path (switch illuminates)
• Out: Press to remove the compressor in signal path (switch unlit)
• BYPass: Press and hold to engage the relay-based hard bypass
(switch illuminates in red)
NOTE: When the 527A is powered off, it is held in the BYPass state. When the compressor is not
in the BYPass state (red BYP LED not illuminated), the 527A behaves normally.
Bekijk gratis de handleiding van API Audio 527A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | API Audio |
| Model | 527A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2708 MB |
