Handleiding
Je bekijkt pagina 18 van 96
17
BULB REPLACEMENT
Important :
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact with hands.
When handling bulbs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb.
Note:
Before Replacement light that the cooker hood can be isolated from the supply
mains by means of a plug or an all-pole switch.
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
Remove the grease filter.
Find out the junction box, unscrew the screws on the junction box cover, then take
down the junction box cover(If there is wire pressing plate which pressed the light
wire, the wire pressing plate needs to be dismantled first).See pic 1.
Find out the terminal of the light connecting wire and pull it out. See pic 2.
Way 1. Use a tool or the hand to press the spring splinter of both sides of LED light
to the inside, until the light is pressed out, see pic 3.Then slightly pull the light
connecting wire out, see pic 4.
Way 2. Use straight screwdriver to prize up the LED light bottom edge, see pic 5,
then slightly pull out the light connecting wire, see pic 4.
• ILCOS D code for this lamp is: DBS-2/65-H-120/33
– LED modules –rectangle lamp
– Max wattage: 1 x 2 W
– Voltage range: AC 110-240V
– Dimensions:
Bekijk gratis de handleiding van Apelson TALIA 601, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Apelson |
| Model | TALIA 601 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 10085 MB |