Handleiding
Je bekijkt pagina 28 van 37
26
Screen Saver
Off / Slow / Fa
When a static image is detected for a certain
period of time, the screen saver function will dim
the screen to protect the panel from sticking.
When a moving image is detected, the monitor
will recover luminance to previous working
status. Default setting is Slow and may change
as Fast to active Screen Saver sooner. Would
highly recommend that you always turn on
Screen Saver as Slow or Fast to protect the
screen. It is also recommended that you also set
your device to use a screen saver.
Logos Protection
Off/1/2
When there are multiple static logos detected
on the screen, it’s suggested to turn on logos
Protection; which will dim the screen to protect
the panel from image sticking where logos are
detected.
Boundary Dimmer
Off/1/2/3
For special aspect ratios that have a black area
in the frame of the screen or a split-screen, the
boundary dimmer feature can automatically
detect and dim the brightness of specic areas
with a large dierence in brightness levels.
Taskbar Dimmer
Off/1/2/3
The Taskbar Dimmer technology will dim the
brightness of the taskbar area on the screen. No
brightness changes will
be noticeable in the areas other than in the
taskbar.
ThermalProtection
Off / On
When the temperature of the monitor is over
60 degrees Celsius, the Thermal Protection
feature will automatically dim the brightness of
the screen in order to ensure heat dissipation
properly. It is recommended that you turn on the
feature for the monitor.
Input Select
Auto/ HDMI1/ HDMI2/
DP1/ DP2
Select Input Signal Source
USB
Off / On
Enable/disable the USB function.
O Timer 0-24hrs Select DC o time
Image Ratio
Wide /Aspect / 4:3 /1:1
/17”(4:3) / 19”(4:3) /
19”(5:4) / 19”W(16:10)
/ 21.5”W(16:9) /
22”W(16:10) / 23”W(16:9)
/ 23.6”W(16:9)
/24”W(16:9)
Select image ratio for display.
DDC/CI Yes or No Turn On/O DDC/CI Support
Reset Yes or No Reset the menu to default
Time after Pixel
Refresh
It refers to the time that the screen lights up after
the last Pixel Refresh operation is executed,
in units of hours. A prompt of executing Pixel
Refresh will be automatically sent to the user
every four hours.
Pixel Refresh
Counts
It is used to record the number of times of exe-
cuting Pixel Refresh.
Bekijk gratis de handleiding van AOC AGON Pro AG276UZD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AOC |
| Model | AGON Pro AG276UZD |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4158 MB |
