Anthem MDX-16 handleiding
Handleiding
Je bekijkt pagina 29 van 40
29
4.1 USING ARC WITH AN MDX
In addition to correcting the acoustic response of subs
and speakers in each zone, ARC also:
• Adjusts the left/right balance of the speakers.
• Sets the crossover point between the speakers and sub-
woofer (do not manually change this after running ARC).
• Adjust the subwoofer’s level relative to the speakers.
• Sets the phase and polarity of the subwoofer relative to
the speakers (requires the additional step of running the
Automatic Phase Adjustment tool after uploading correc-
tions to the MDX).
Before using Anthem Room Correction:
• Name the MDX.
• Set up and name the zones.
• Enable subwoofers (if applicable).
To use Anthem Room Correction:
1. Download and install the program from AnthemARC.com.
2. Start the program and select Launch ARC from the rst screen.
3. Select the MDX from the device discovery screen.
4. Select the zone you wish to measure from the drop-
down list.
5. Follow the on-screen instructions to measure the zone,
calculate correction curves, and upload them to the MDX.
6. After uploading the corrections, run the Automatic Phase
Adjustment tool from the Review Summary & Upload
screen. This tool sets the phase of a subwoofer to opti-
mize its integration with the speakers.
Bekijk gratis de handleiding van Anthem MDX-16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Anthem |
| Model | MDX-16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3535 MB |
